Repeater Base Wall
The BS2000 is a modular platform. The cabinet houses different transceivers, modules, I/O interfaces and control units, and can be configured to the installation: frequency band, mode of operation, signalling system, voice or data or both, supply voltage and UPS, and output power.
A duplicated-transceiver version is available. It runs a hot and standby configuration that switches over automatically if the main transceiver fails — for sites where the radio network cannot be down while an engineer travels there.
Every TP Radio transceiver goes through a final test procedure before it leaves the factory, including a temperature cycle from −25 °C to +55 °C.
The kit contains
- BK001 — cabinet for BS2000, wall suspension
- RE605/x43i — TP6000i duplex transceiver for BS2000
- DF60x — duplex filter
- ST601 — coax cable kit for the duplex filter
- MP002 — mounting plate for the duplex filter
- PS005 — power supply
- MP022 — mounting plate for the power supply
- ST608 — coax cable N/BNC
- SI601 — DC distribution panel with fuse
- ST615/5 — DC distribution cabling for BS2000
Options
- TP-2263 — CTCSS tone encoder/decoder and repeater module
- TP-2289 — 5-tone encoder/decoder and repeater control
- ST609/5 — cable for power supply PS005, replaces SI601 and ST615/5
| Dimensions | H 530 × W 320 × D 125 mm (BK001) |
|---|---|
| Antenna impedance | 50 Ohm |
| Capacity | Capacity |
| Channel Spacing | 12.5 / 20 / 25 kHz |
| Charging current | Charging current |
| Discharge Current | Discharge Current |
| Frequency error | ± 2 ppm (option +/- 0.1 ppm) |
| Mode of operation | Simplex / Semi-duplex / Duplex (with filter) |
| Number of channels | 32 standard, 127 with option |
| Output power | Adjustable high/low in two steps 5 - 25W (40 & 50W available - please contact sales) |
| Power Supply | 110/120 or 220/240 V AC 50/60 Hz, or 13.2 V DC (max 8 A at 25 W TX) |
| RF-bandwidth | 60 MHz 70 MHz 38 MHz 20 MHz |
| Sensitivity | VHF 0.4 µV, UHF 0.5 µV @ 20 dB |
| Signalling | CCIR, ZVEI, EEA, CTCSS and DTMF |
| Stand-by | 0.2 Amps at 13.2 VDC |
| Temperature range | -30° to + 70°C |
| Voltage | Voltage |
| Weight | Approx. 16 kg (Fully equipped BK001) |
| More info | See Download/Datasheet |
