Portable Repeater Base
Two handheld radios normally reach each other over a few kilometres. With this repeater between them, that distance becomes up to ten times longer. It works with radios you already own, including radios from other manufacturers.
The repeater is built for situations that appear at short notice: rescue operations, emergency areas, construction and offshore sites, fire and rescue work, and sports events. Set-up is to connect a power supply and mount an antenna as high as practical.
It runs from its internal battery or a 10 to 55 V DC supply, and has four digital inputs for external signalling.
| Battery | Li-Ion 12,6V / 10 Ah |
|---|---|
| Dimensions | 34 × 30 × 15 cm |
| Antenna impedance | 50 Ohm |
| Channel Spacing | 12,5 / 20 / 25 KHz |
| Frequency error | ± 2 ppm (option +/- 0.1 ppm) |
| Mode of operation | Duplex |
| Number of channels | 128 |
| Output power | Adjustable high/low in two steps 5 - 25W |
| Power | 10–55 V DC |
| RF-bandwidth | 60 MHz 70 MHz 38 MHz 20 MHz |
| Sensitivity | 0.8 µV typ. @ 20 dB |
| Signalling | CTCSS/DCS encoder and decoder, 5-tone CCIR or ZVEI |
| Stand-by | 0,2 Amps at 13,2 VDC |
| Temperature range | -20° to + 55°C |
| Weight | 5.9 Kg |
| More info | See Download/Datasheet |
